NETGEAR LM1200 User Manual

1
Introduction and Hardware
Overview
This manual is for the following NETGEAR
®
4G LTE Modem LM1200 models:
•
LM1200-100NAS
•
LM1200-200NAS
•
LM1200-111NAS
All models provide band support for the North America region.
This chapter provides an introduction and hardware overview of the NETGEAR 4G LTE
Modem LM1200 models and contains the following sections:
• Introduction
• Supported Mobile Broadband Bands
• Package Contents
• Install the Nano SIM Card
• Power on Your Modem
• Top Panel With Status LEDs
• Back Panel Connectors, Buttons, and Ports
• Position the Modem
• Optional External Antenna
Note: For more information about the topics that are covered in this manual, visit the
support website at netgear.com/support.
Note: Firmware updates with new features and bug fixes are made available from time
to time at downloadcenter.netgear.com or over the air. If the features or behavior of
your product does not match what is described in this guide, you might need to update
your firmware.
6

NETGEAR LM1200 Specifications

General

DSL WAN	No
Ethernet WAN	Yes
WAN connection type	RJ-45
Wi-Fi band	-
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
4G standard	LTE
3G standards	HSPA+
Mobile network generation	4G
Ethernet LAN (RJ-45) ports	1
Cables included	LAN (RJ-45), USB Type-C
Output current	2 A
Output voltage	5 V
Power consumption (typical)	- W
Product color	White
Storage temperature (T-T)	-25 - 55 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	0 - 90 %

Weight and Dimensions

Width	116 mm
Height	32.25 mm
Weight	180 g