NETGEAR LM1200 User Manual

DescriptionField
Enter the name or acronym of the mobile broadband service provider or any other information
that might help you to identify the APN profile.
Name
Enter the APN that provides access to the mobile broadband network. Use the information
that your mobile broadband service provider gave you.
APN
From the menu, select the authentication mode to access the mobile broadband network:
•
None. The service provider does not require authentication. This setting is the default
setting.
•
PAP. The service provider uses Password Authentication Protocol (PAP).
•
CHAP. The service provider uses Challenge Handshake Authentication Protocol (CHAP).
•
PAP or CHAP. The service provider uses either PAP or CHAP.
Authentication
If you select an authentication mode, enter the user name to access the mobile broadband
network.
Username
If you select an authentication mode, enter the password to access the mobile broadband
network.
Password
From the menu, select the packet data protocol (PDP):
•
IPV4. The mobile broadband network uses IPv4 only.
•
IPV4V6. The mobile broadband network uses either IPv4 or IPv6.
PDP
From the menu, select the PDP that is used for roaming:
•
None. The modem does not use the specified PDP for roaming. This is the default setting.
•
IPV4. The mobile broadband network uses IPv4 only for roaming.
•
IPV4V6. The mobile broadband network uses either IPv6 or IPv6 for roaming.
PDP
Roaming
9. Click the Save button.
The new APN profile displays on the page but is not the active profile until you select
it as such (see Select an APN Profile on page 24).
Select an APN Profile
Although rarely required, you can select an APN profile manually. The modem uses the
selected APN profile to establish a connection with the mobile broadband network of
the service provider.
User Manual24Manage the Mobile Broadband
Connection
NETGEAR 4G LTE Modem LM1200

NETGEAR LM1200 Specifications

General

DSL WAN	No
Ethernet WAN	Yes
WAN connection type	RJ-45
Wi-Fi band	-
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
4G standard	LTE
3G standards	HSPA+
Mobile network generation	4G
Ethernet LAN (RJ-45) ports	1
Cables included	LAN (RJ-45), USB Type-C
Output current	2 A
Output voltage	5 V
Power consumption (typical)	- W
Product color	White
Storage temperature (T-T)	-25 - 55 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	0 - 90 %

Weight and Dimensions

Width	116 mm
Height	32.25 mm
Weight	180 g