EasyManuals Logo

NETGEAR M4100 Series Software Setup Manual

NETGEAR M4100 Series
27 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
Get Started
14
M4100 Series Switches
Switching. Features that relate to Layer 2 services such as VLANs, link aggregation,
Spanning Tree Protocol, port configuration, and the MAC address table
Routing. Layer 3 services such as VLAN routing, port routing, and protocols such as RIP,
OSPF, VRRP, and other protocols
QoS. Quality of Service features such as DiffServ and CoS queue assignment
Security. Security services such as 802.1x port authentication, traffic control with various
forwarding controls, and ACLs
Monitoring. Ethernet port statistics, various system logs, and port mirroring
Maintenance. Services to perform a firmware upgrade, to save the configuration, and to
perform a backup of the configuration
Use the Web Management Interface to Configure the
Management VLAN Interface
You can configure the management VLAN interface through the web management interface.
However, if you already configured the switch for in-band connectivity (see Use the
Management VLAN Interface or Console Port for Initial Configuration on page 7), the switch
is already connected to the network, access to the web management interface is enabled,
and you do not need to perform the following task.
To configure the management VLAN interface through the web management interface:
1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3. Launch a web browser such as Google Chrome, Mozilla Firefox, or Microsoft Internet
Explorer.
4. Enter the IP address of the switch in the web browser address field.
Enter 169.254.100.100, which is the default IP address of the management VLAN
interface.
The Login screen displays.
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
7. Select System > Management > IPv4 Management VLAN Configuration.

Table of Contents

Other manuals for NETGEAR M4100 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR M4100 Series and is the answer not in the manual?

NETGEAR M4100 Series Specifications

General IconGeneral
ModelM4100 Series
Switch TypeManaged
Form FactorRack-mountable
Port Configuration24 or 48 ports
Ethernet Ports10/100/1000 Mbps
PoE SupportAvailable on some models (PoE and PoE+)
LayerLayer 2/Layer 3
ManagementWeb-based, CLI, SNMP
VLAN SupportYes
QoSYes
StackableYes
Ports24 or 48
Jumbo Frame SupportYes
Security FeaturesACL, 802.1X, RADIUS, TACACS+
Operating Temperature0° to 50° C (32° to 122° F)
Storage Temperature-20° to 70° C (-4° to 158° F)
Power SupplyInternal power supply

Related product manuals