Advanced Settings
88
R6250 Smart WiFi Router
Set up the Router in Bridge Mode
You can set up your R6250 Smart WiFi Router to run in Bridge mode. This mode lets you
connect multiple devices wirelessly at the faster 802.11ac speed. To use the router in Bridge
mode, you need two WiFi Routers: one set up as a router and the other set up as a bridge.
R6250 Smart WiFi Router in Bridge modeR6300 Smart WiFi Router
Figure 10. Router in Bridge mode with an 802.11ac WiFi connection
Installing your R6250 Smart WiFi Router as a bridge offers the following benefits:
• Y
ou can take advantage of gigabit WiFi speeds on current devices.
• Use Gigabit WiFi for applications like video and gaming.
• Connect multiple devices like NAS, Smart
TV, NeoTV, Blu-ray Player, game console at
gigabit WiFi speeds using a WiFi link.
• A
void the need for separate WiFi adapters for each device.
For example, you could install the first router in a room like a home office that has your
Internet connection.
After this router is up and running, set up the second router in Bridge
mode. Then place the router in Bridge mode in a different room that has your home
entertainment center. Cable the router in Bridge mode to your Smart TV, DVR, game console
or Blu-ray player, and then use its 802.11ac WiFi connection to the first R6300 router.
To set up Bridge mode:
1. Make a note of the WiFi settings of the other router to which this router will connect:
You need to know the SSID, WiFi security mode, wireless password, and operating
frequency (either 2.4 GHz or 5 GHz).
2. On the R6250 Smart WiFi Router that will run in Bridge mode, select Advanced >
Advanced Setup > W
ireless Settings.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
