EasyManuals Logo

NETGEAR R6900P User Manual

NETGEAR R6900P
215 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #72 background imageLoading...
Page #72 background image
To connect a USB device:
1. Insert your USB storage drive into the USB port on the front panel of the router.
2. If your USB device uses a power supply, connect it.
You must use the power supply when you connect the USB device to the router.
When you connect the USB device to the router USB port, it might take up to two minutes before it is
ready for sharing. By default, the USB device is available to all computers on your local area network
(LAN).
Access a Storage Device Connected to the Router
From a computer or device on the network, you can access a storage device that is connected to the router.
Access the Storage Device From a Windows-Based Computer
To access the storage device from a Windows-based computer:
1. Connect a USB storage device to a USB port on the router.
2. If your USB device uses a power supply, connect it.
You must use the power supply when you connect the USB device to the router.
When you connect the storage device to the router’s port, it might take up to two minutes before the
storage device is ready for sharing. By default, the device is available to all computers on your local
area network (LAN).
3. On a Windows-based computer that is connected to the network, select Start > Run.
4. Enter \\readyshare in the dialog box.
5. Click the OK button.
A window displays the files and folders on the device.
Access the Storage Device From a Mac
To access the storage device from a Mac:
1. Connect a USB storage device to a USB port on the router.
2. If your USB device uses a power supply, connect it.
You must use the power supply when you connect the USB device to the router.
When you connect the storage device to the router’s port, it might take up to two minutes before the
storage device is ready for sharing. By default, the device is available to all computers on your local
area network (LAN).
3. On a Mac that is connected to the network, launch Finder and select Go > Connect to Server.
The Connect to Server window displays.
4. In the Server Address field, enter smb://readyshare.
Share a Storage Device Attached to the Router
72
Nighthawk AC1900 Smart WiFi Router Model R6900P

Table of Contents

Other manuals for NETGEAR R6900P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR R6900P and is the answer not in the manual?

NETGEAR R6900P Specifications

General IconGeneral
BrandNETGEAR
ModelR6900P
CategoryWireless Router
LanguageEnglish

Related product manuals