Technical Specifications
The following table shows the technical specifications for model R6900P.
Table 5. Router specifications
DescriptionFeature
TCP/IP, RIP-1, RIP-2, DHCP, PPPoE, Dynamic DNS, UPnP, and SMBData and routing protocols
• North America: 120V, 60 Hz, input
• All regions: 12V @ 3.5A output
Power adapter
Dimensions: 280 x 182 x 49 mm (11 x 7.17 x 1.9 in.)Dimensions
Weight: 430 g (0.94 lb)Weight
0° to 40°C (32º to 104ºF)Operating temperature
90% maximum relative humidity, noncondensingOperating humidity
FCC Part 15 Class BElectromagnetic emissions
Four RJ-45 ports supporting 10BASE-T, 100BASE-TX, and 1000BASE-TLAN
One RJ-45 port supporting 10BASE-T, 100BASE-TX, and 1000BASE-TWAN
Maximum WiFi signal rate complies with the IEEE 802.11 standard.
NETGEAR makes no express or implied
representations or warranties about this product’s
compatibility with any future WiFi standards. 802.11ac
1300 Mbps is approximately 3x faster than 802.11n
450 Mbps. Up to 1300 Mbps WiFi speeds achieved
when connecting to other 802.11ac 1300 Mbps devices.
Note
WiFi
Auto-rate sensingRadio data rates
• IEEE 802.11 b/g/n 2.4 GHz
• IEEE 802.11 a/n/ac 5.0 GHz
Data encoding standards
Limited by the amount of WiFi network traffic generated by each node
(typically 50–70 nodes)
Maximum computers per WiFi
network
Supplemental Information
214
Nighthawk AC1900 Smart WiFi Router Model R6900P