NETGEAR R6900P User Manual

4. Select ADVANCED > Setup > LAN Setup.
The LAN Setup page displays.
5. In the Address Reservation section, select the radio button for the reserved address.
6. Click the Edit button.
The Address Reservation page displays.
7. Change the settings.
8. Click the Apply button.
Your settings are saved.
Remove a Reserved IP Address Entry
You can remove a reserved IP address entry.
To remove a reserved IP address entry:
1. Launch a web browser from a computer or mobile device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin.The default password is password.The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > LAN Setup.
The LAN Setup page displays.
5. In the Address Reservation section, select the radio button for the reserved address.
6. Click the Delete button.
The address entry is removed.
Disable the Built-In DHCP Server
By default, the router functions as a DHCP server.The router assigns IP, DNS server, and default gateway
addresses to all devices connected to the LAN.The assigned default gateway address is the LAN address
of the router.
You can use another device on your network as the DHCP server or specify the network settings of all your
computers.
If you disable the DHCP server and no other DHCP server is available on your network,
you must set your computer IP addresses manually so that they can access the router.
Note
Manage the WAN and LAN Network Settings
126
Nighthawk AC1900 Smart WiFi Router Model R6900P

NETGEAR R6900P Specifications

General

Brand	NETGEAR
Model	R6900P
Category	Wireless Router
Language	English