NETGEAR R9000 User Manual

9
Use Dynamic DNS to Access USB
Storage Devices Through the Internet
With Dynamic DNS, you can use the Internet to access USB devices attached to the router’s USB ports when
you’re not home.
This chapter includes the following sections:
• Set Up and Manage Dynamic DNS on page 104
• Set Up FTP Access Through the Internet on page 104
• Your Personal FTP Server on page 105
• Access USB Storage Devices Through the Internet on page 108
• Remotely Access a USB Device Using ReadyCLOUD on page 108
For information about how to connect the device and specify its settings, see Share USB Storage Devices
Attached to the Router on page 89.
103

NETGEAR R9000 Specifications

General

Processor	1.7GHz Quad-Core Processor
RAM	1GB
Flash Memory	512MB
WiFi Technology	802.11ac
WiFi Band	2.4GHz, 5GHz
Ethernet Ports	6 x 10/100/1000Mbps Gigabit Ethernet ports
USB Ports	Two USB 3.0 ports
Antenna	4 external antennas
Security	WPA/WPA2-PSK