Supplemental Information
107
ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
Radio frequency channels 11ng: Auto
11ac: Auto
MCS index/data rate (transmission speed) Best
Note: Maximum wireless signal rate derived
from IEEE Standard 802.11 specifications.
Actual throughput will vary. Network conditions
and environmental factors, including volume of
network traffic, building materials and
construction, and network overhead, lower actual
data throughput rate.
Channel width 11ng: 20 MHz
11ac: Dynamic 20/40 MHz
Guard interval Auto
Output power Full
Wireless on/off (radio scheduling) Disabled
RTS threshold 2347
Fragmentation length 2346
Beacon interval 100
Aggregation length 65535
A-MPDU Enabled
RIFS transmission Disabled
DTIM interval 3
Preamble type Auto
Antenna Internal
802.11d Enabled
Maximum wireless clients 400
Wi-Fi Multimedia (WMM) Enabled
WMM powersave Enabled
AP EDCA parameters (QoS settings)
See Configure and Manage Quality of Service
Policies on page 83.
Station EDCA parameters (QoS settings)
QoS policies None
Wireless bridging Disabled
Table 5. Default configuration settings (continued)
Feature Description
To Next Page
Loading...
