Management and Monitoring
57
ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
Reboot the Wireless Access Point Without Restoring the
Default Configuration
If you cannot physically access the wireless access point to turn it off and on again, you can
use the software to reboot the wireless access point.
To reboot the wireless access point:
1. Select Maintenance > Reset > Reboot AP.
2. Select the Yes radio button.
By default, the No radio button is selected.
3. Click the Apply button to reboot the wireless access point.
The reboot process typically takes about one minute. When the Test LED turns off, wait a
few more seconds before doing anything with the wireless access point.
Change the Administrator Password
The default password is password. We recommend that you change this password to a
more secure password. You cannot change the administrator login name (admin).
The ideal password contains no dictionary words from any language and is a mixture of
letters (both uppercase and lowercase), numbers, and symbols. Your password can be up to
30 characters.
To change the administrator password:
1. Select Maintenance > Password > Change Password.
To Next Page
Loading...
