NETGEAR WAC720

Advanced Configuration
88
ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
Note: Rate limiting for the wireless interface is an optional setting that
applies to all traffic on the wireless interface. Unlike classification rate
limiting, which you can specify for each classification, rate limiting for
the wireless interface you must specify only once.
Modify a QoS Policy
 To modify a QoS policy:
1. Select Configuration > Wireless > Advanced > QoS Policies.
The QoS Policies page displays.
2. From the Create Policy menu, select the policy that you want to modify.
3. To modify a classification, you must delete the classification and add a new classification:
a. In the Classification field, select the old classification.
b. Click the Delete Classification button.
c. Add a new classification.
For information about how to add a classification, see Step 4 through Step 6 in the
procedure to configure a new QoS policy.
4. To change the name of the policy, in the Policy Name field, enter a new name for the QoS
policy.
5. Click the Apply button.
Your settings are saved.
Delete a QoS Policy
 To delete a QoS policy:
1. Select Configuration > Wireless > Advanced > QoS Policies.
The QoS Policies page displays.
2. From the Create Policy menu, select the policy that you want to delete.
3. Click the Delete Policy button.
4. Click the Apply button.
Your settings are saved.