NETGEAR WAC720

Management and Monitoring
66
ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
View the Activity Log
You can view the wireless access point’s activity logs and save the logs.
 To display the activity log and save it:
1. Select Monitoring > Logs.
2. Click the Save As button to save the log contents to a file on your computer or to a disk
drive.
3. To update the display, click the Refresh button.
4. To clear the log content, click the Clear button.
Tx Sequence The sequence number of the last frame that was transmitted to the wireless station.
Rx Sequence The sequence number of the last frame that was received from the wireless station.
Capability The summary of the capability of the wireless station that was detected during
association.
Cipher The cipher that the wireless station is using and that defines the type of encryption.
SNR The signal-to-noise ratio (SNR) that indicates how much the signal of the wireless
station has been corrupted by noise.
Recv. Bytes The number of bytes received on the wireless station since it last started.
Trans. bytes The number of bytes transmitted by the wireless station since it last started.
Assoc. Time Stamp The time when these details of the wireless station were retrieved.
IP Address The IP address of the wireless station.
Channel Width The channel width at which the wireless station operates.
Setting Description