NETGEAR WAC720

Management and Monitoring
71
ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
2. Select the Enabled radio button.
3. Enter a passphrase between 8 and 63 characters in the passphrase field.
4. Enter a time-out period between 300 and 86400 seconds.
5. Click the Apply button.
Monitor an Ensemble
You can monitor the status of an ensemble from the ensemble dashboard. You can also
monitor the devices connected to members of the ensemble as well as monitor networks
neighboring the ensemble.
Monitor the Status of the Ensemble
 To monitor the status of the ensemble:
1. Select Monitor > Ensemble > Access Point.
2. Click the Refresh button.
The information on the page refreshes.
Monitor the Devices Connected to the Ensemble
 To monitor the devices connected to the ensemble:
1. Select Monitor > Ensemble > Wireless Stations.
2. Click the Refresh button.
The devices connected to the ensemble display, listed by MAC address.