NETGEAR WAC720

Management and Monitoring
59
ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
2. Configure the settings in the upper part of the page as explained in the following table:
3. Click the Add button.
The user account is added.
4. Click the Apply button.
Your settings are saved.
Change the Name for a User Account
 To change the name for a user account:
1. Select Configuration > System > Advanced > User Accounts.
The User Accounts page displays.
2. In the Update User Accounts section, select a user from the Existing Users menu.
3. In the User Name field, modify the name.
4. Click the Modify button.
The user name is changed.
5. Click the Apply button.
Your settings are saved.
Change the Privilege for a User Account
 To change the privilege for a user account:
1. Select Configuration > System > Advanced > User Accounts.
The User Accounts page displays.
2. In the Update User Accounts section, select a user from the Existing Users menu.
3. From the Privilege menu, select another privilege.
4. Click the Reset Password button.
The password is reset to the default password, which is password.
5. Click the Apply button.
Your settings are saved.
Setting Description
User Name Enter a new user name.
Password Enter a password between 4 and 12 characters in length.
Privilege From the Privilege menu, select Read Write or Read Only.