Initial Setup
17
ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
To configure time settings:
1. Select Configuration > System > Basic > Time.
2. Configure the settings as explained in the following table:
3. Click the Apply button.
Your settings are saved.
Setting Description
Time Zone Select the time zone to match your location.
Current Time This is a nonconfigurable field that displays the current date and time.
NTP Client Enable the Network Time Protocol (NTP) client to synchronize the time of the
wireless access point with an NTP server. By default the Enable radio button is
selected.
Use Custom NTP Server Select this check box if you want to use a custom NTP server.
Note: You need an Internet connection to use an NTP server that is not on
your local network.
Hostname /
IP Address
Enter the host name or IP address of the custom NTP server.
The default is time-b.netgear.com.
Note: If you use a host name, make sure that you configured a
DNS server.
To Next Page
Loading...
