Wireless Configuration and Security
36
ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
2. To configure a wireless security profile, select the corresponding radio button to the left of
the wireless security profile.
3. Click the Edit button.
The Edit Security Profile page displays. This page contains three sections:
• Profile Definition (see Step 4)
• Authentication Settings (see Step 5)
• QoS Policies (see Step 6)
4. Specify the settings of the Profile Definition section as explained in the following table:
VLAN The default VLAN ID that is associated with the wireless security profile.
WMF Enable The check box that lets you select the wireless security profile so that you
can enable it by clicking the Apply button.
Setting Description
Profile Name Enter a unique name of the wireless security profile that makes it easy to
recognize the profile. The default names are NETGEAR, NETGEAR-1,
NETGEAR-2, and so on, through NETGEAR-7. You can enter a value of up to
32 alphanumeric characters.
Setting Description
To Next Page
Loading...
