Wireless Configuration and Security
38
ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
6. (Optional) In the QoS Policies section, select a QoS policy from the Incoming menu,
Outgoing menu, or both. Depending on your selection, the policy is applied to incoming
packets, outgoing packets, or both incoming and outgoing packets, and is displayed in the
Policy Details fields.
Note: To be able to select a QoS policy, you must first configure one or more
policies (see Configure and Manage Quality of Service Policies on page 83).
7. Click the Apply button.
Your settings are saved.
Network Authentication
and Data Encryption
(continued)
WPA2 with
RADIUS
Configure the RADIUS server settings and select AES or
TKIP + AES encryption.
See Configure WPA With RADIUS and WPA & WPA2 With
RADIUS on page 39.
Note: Select this setting only if all clients support WPA2.
WPA & WPA2 with
RADIUS
Configure the RADIUS server setting. TKIP + AES
encryption is the default encryption.
See Configure WPA With RADIUS and WPA & WPA2 With
RADIUS on page 39.
Note: This setting allows clients to connect through either
WPA with TKIP or WPA2 with AES.
WPA-PSK Enter a WPA passphrase and select TKIP or TKIP + AES
encryption.
See Configure WPA-PSK, WPA2-PSK, and WPA-PSK &
WPA2-PSK on page 40.
WPA2-PSK Enter a WPA passphrase and select AES or TKIP + AES
encryption.
See Configure WPA-PSK, WPA2-PSK, and WPA-PSK &
WPA2-PSK on page 40.
Note: Select this setting only if all clients support WPA2.
WPA-PSK &
WPA2-PSK
Enter a WPA passphrase. TKIP + AES encryption is the
default encryption.
See Configure WPA-PSK, WPA2-PSK, and WPA-PSK &
WPA2-PSK on page 40.
Note: This setting allows clients to connect through either
WPA with TKIP or WPA2 with AES.
Wireless Client Security
Separation
If you enable wireless client security separation by selecting Enable from the
menu, the associated wireless clients cannot communicate with each other. By
default, Disable is selected from the menu. This feature is intended for hotspots
and other public access situations.
VLAN ID Enter the VLAN ID to be associated with this wireless security profile. The
default VLAN ID is 1. The VLAN ID must match the VLAN ID that is used by the
other devices in your network.
Setting Description
To Next Page
Loading...
