NETGEAR WAC720

Wireless Configuration and Security
42
ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
3. Click the Apply button.
Your settings are saved.
Secondary
Authentication Server
IPv4 Address or
IPv6 Address
Enter the IP address of the secondary RADIUS server for
authentication. The secondary RADIUS server is used when the
primary RADIUS server is not available.
Port Enter the number of the UDP port on the wireless access point
that is used to access the secondary RADIUS server for
authentication. The default port number is 1812.
Shared Secret Enter the shared key that is used between the wireless access
point and the secondary RADIUS server during authentication.
Primary
Accounting Server
IPv4 Address or
IPv6 Address
Enter the IP address of the primary RADIUS server for
accounting.
Port Enter the number of the UDP port on the wireless access point
that is used to access the primary RADIUS server for accounting.
The default port number is 1813.
Shared Secret Enter the shared key that is used between the wireless access
point and the primary RADIUS server during the accounting
process.
Secondary
Accounting Server
IPv4 Address or
IPv6 Address
Enter the IP address of the secondary RADIUS server for
accounting. The secondary RADIUS server is used when the
primary RADIUS server is not available.
Port Enter the number of the UDP port on the wireless access point
that is used to access the secondary RADIUS server for
accounting. The default port number is 1813.
Shared Secret Enter the shared key that is used between the wireless access
point and the secondary RADIUS server during the accounting
process.
Authentication Settings
Reauthentication
Time (Seconds)
The interval in seconds after which the supplicant is reauthenticated with the
RADIUS server. The default interval is 3600 seconds (1 hour). Enter 0 to disable
reauthentication.
Update Global Key
Every (Seconds)
Select the check box to allow the global key update, and enter the interval in
seconds. The check box is selected by default, and the default interval is
1800 seconds (30 minutes). Clear the check box to prevent the global key update.
Setting Descriptions