NETGEAR WNAP210 User Manual

Management
38
ProSafe Wireless-N Access Point WNAP210
 To restore the factory settings:
1. Select Maintenance > Reset > Restore Defaults. The Restore Defaults screen
displays:
2. Select the Yes radio button.
3. Click Apply.
The access point password is password, the access point DHCP client is disabled, the
default LAN IP address is 192.168.0.236, and the access point name is reset to the name
printed on the label on the bottom of the unit.

NETGEAR WNAP210 Specifications

General

Brand	NETGEAR
Model	WNAP210
Category	Wireless Access Point
Language	English