Getting Started
8
ProSafe Wireless-N Access Point WNAP210
Rear Panel
Power Ethernet Restore
Factory
Settings
Figure 2. Rear panel
The access point rear panel functions are described in the following list:
• Power socket. This socket connects to the 12V 1.0A power adapter.
• RJ-45 Ethernet port. Use the Ethernet RJ-45 port to connect to an Ethernet LAN through
a device such as a hub, switch, router, or PoE switch.
• Restore Factory Settings button. This button restores the access point to the factory
default settings.
To Next Page
Loading...
