NETGEAR WNAP210 User Manual

Command Line Reference
73
ProSafe Wireless-N Access Point WNAP210
| | |-authentication-server-primary --primary authentication server
| | |-authentication-server-primary-port --primary system accounting server
shared secret
| | |-authentication-server-primary-sharedsecret --primary authentication server
shared secret
| | |-authentication-server-secondary --secondary authentication server
| | |-authentication-server-secondary-port --secondary authentication server
port
| | |-authentication-server-secondary-sharedsecret --secondary authentication
server shared secret
| |
| |-remote> --enable remote access via SSH
| | |-ssh-port --SSH port
| | |-sshd --SSH daemon
| | |-telnet --enable remote access via Telnet
| |
| |-snmp> --SNMP setting
| | |-description --SNMP system description
| | |-read-community --SNMP ReadCommunity
| | |-snmp-status --SNMP status
| | |-trap-community --SNMP ReadCommunity
| | |-trap-server --SNMP TrapServer IP address
| | |-write-community --SNMP WriteCommunity
| |
| |-spanning-tree --enable spanning tree protocol
| |-time> --time Setting
| | |-custom-ntp-server --custom NTP server host name
| | |-daylightsaving --daylight saving
| | |-ntp-client --NTP client host name
| | |-ntp-server --NTP server host name
| | |-time-zone --time zone
| |
| |-vlan> --vlan settings
| | |-management-vlan --vlan management id
| | |-untagged-vlan --untagged vlan id
| | |-untagged-vlan-status --untagged vlan status
| |
|
|-exit --logout from CLI
|-file --
|-firmware-upgrade --upload new system firmware file
|-password --system password
|-restore-configuration --restore system configuration

NETGEAR WNAP210 Specifications

General

Brand	NETGEAR
Model	WNAP210
Category	Wireless Access Point
Language	English