NETGEAR XR500 Nighthawk - Page 183

Table 3. Router model XR500 factory default settings (Continued)
Default SettingFeature
EnabledWiFi communicationGeneral WiFi
settings
EnabledSmart Connect
Enabled20/40 MHz Coexistence
See router labelSSID name
EnabledBroadcast SSID
WPA2-PSK (AES)Security
2.4 GHz: Auto
5 GHz for products for world wide use: Channel 44
5 GHz for products for use in North America: Channel 153
RF channel
2.4 GHz: Up to 800 Mbps
5 GHz: Up to 1773 Mbps
Operating mode
2347CTS/RTS threshold
AutomaticPreamble mode
100%Transmit power control
DisabledWiFi communicationGuest WiFi
network
EnabledBroadcast SSID
2.4 GHz band: NETGEAR-Guest
5 GHz band: NETGEAR-5G-Guest
SSID name
None (open network)Security
DisabledAllow guests to see each other and
access the local network
EnabledWPS capabilityWPS
Disabled while Smart Connect is enabledRouter’s WPS PIN
DisabledKeep Existing Wireless Settings
Supplemental Information
183
XR500 Nighthawk Pro Gaming Router