Configuring the Wi-Fi Network 114
Configuring the Wi-Fi Network
See the following topics for information on configuring the Wi-Fi Network.
Setting the Maximum Number of Wi-Fi Devices
If your network is having performance issues, you might want to decrease the number of Wi-Fi
devices allowed to connect to your device at the same time, or change the maximum number of
devices that can connect to either the Main Wi-Fi or Guest Wi-Fi networks at the same time.
(When Guest Wi-Fi is turned on, the maximum number of Wi-Fi devices is shared between Main
Wi-Fi and Guest Wi-Fi.)
Note: Your device is factory preset to allow a maximum of ten (10) Wi-Fi devices, with eight (8)
on Main Wi-Fi and two (2) on Guest Wi-Fi.
You can change these limits on your device’s Wi-Fi Options screen, or on the Zing Manager’s
Wi-Fi > Connect and Wi-Fi > Options pages.
On the Touchscreen
1. Tap > Wi-Fi > Options.
2. Tap Max Wi-Fi Devices.
3. Select the total number of Wi-Fi devices that can connect to your device at the same
time.
If Guest Wi-Fi is turned off, you’re done. Otherwise, go to the next step to set the
number of devices that can connect to the Main and Guest Wi-Fi networks.
Note: If you change the Max Wi-Fi Devices value, the Main Wi-Fi and Guest Wi-Fi values
automatically adjust to match the new total.
4. Tap to increase the Main Wi-Fi device limit, or tap to increase the Guest Wi-Fi
device limit. (Increasing one decreases the other.)
5. Tap Submit.
In the Zing Manager (via the hotspot URL)
1. Log in to the home page. (See Logging In as an Administrator.)
2. Click Wi-Fi > Options.
3. Beside Max Wi-Fi, select the total number of Wi-Fi devices that can connect to your
device at the same time.
To Next Page
Loading...
Need help?
General
