Configuring the Wi-Fi Network 121
On the Touchscreen
1. Tap > Devices. A list of the devices connected to your Main and Guest Wi-Fi
networks appears. If you do not want to block a device, return to the home screen.
2. If you want to block a listed device, tap the device name. The device’s IP address and
MAC address display.
3. Tap Block Device.
4. Tap Continue Block.
In the Zing Manager (via the hotspot URL)
1. Log in to the home page. (See Logging In as an Administrator.)
The Devices Connected section of the home page shows a list of the devices
connected to your Main and Guest Wi-Fi networks.
2. If you want to block a listed device, click the device name. The device’s IP address and
MAC address display.
3. Click Block Device.
4. Click Block Device again.
View and Unblock Devices (Block List)
You can view a list of devices that you have blocked (see Displaying and Blocking Currently
Connected Devices (Block List)) from connecting to your NETGEAR Zing Mobile Hotspot on
your device’s Wi-Fi Block List screen, and on the Zing Manager’s Wi-Fi MAC Filter page.
If you want to allow any of these devices to connect to the network again, you can remove them
from your device’s block list.
On the Touchscreen
1. Tap > Devices.
2. Go to the last page of the Devices screen and tap Block List.
3. Tap View blocked devices. A list of the devices blocked from using your Wi-Fi networks
appears.
4. Tap the name of the device you want to unblock.
5. Tap Unblock.
To Next Page
Loading...
Need help?
General
