NETGEAR Zing - Page 83

Zing Manager (Browser) Interface 75
2. Click Settings > Network > APN.
To add (or modify) an APN, see Configuring Access Point Names.
The list of all APNs that have been set up includes the following information.
Item
Description
Active
The APN currently in use. Only one APN can be marked as active.
Name
Network carrier name.
APN
The operator’s access point name (obtained from the operator).
Username
If required, the username (obtained from the operator) used to connect
to the APN.
Password
If required, the password (obtained from the operator) used to connect
to the APN.