Payment Terminals | Page 13 of 54
3.3 Parameter Menu
The Parameter Menu options are explained in Table 3.
Level 1 Level 2 Level 3 Explanation
1 Function
Terminal ID Enter Unique ID
Amount Mode Øre/Kroner or Cent/Euro
Backup Solution
(EOT)
Yes/No
It is used to enable/disable
BankAxept offline. Applicable in
Norway.
Service First Yes/No
To enable/disable card-initiated
transactions.
Information Field
No Information/CID/
Information Text/OperID
Additional information is required
to be sent to the PSP.
Sound None/On Error/Always
Always Copy No/Yes
Yes: Always 2 copies of receipt
will be printed
No: Only one copy of receipt will
be printed.
Duplicate Check No/Yes
Yes: Customer will not be able to
make 2 transactions with the
same amount.
No: Customer can make a number
of transactions with the same
amount.
Language
NO, SE, DK, EN, FI, DE, HU, ET,
PL, NL, FR, ES
All these languages are supported
by the terminal.
Tips Total amount > Yes/No
Change Operator
Disable/After Reconc/After
Z-Total/Always/After
0-Report
This option comes into use when
there is more than one operator
using that terminal.
VAT
Fixed Rate/Change Rate/No
VAT
VAT Rate
Sleep Mode
Auto/Always (not visible if
ECR switched on)
Only applicable for battery-
operated terminals.
Power-Off Modes
Never/After 1 hour/After 2
hours
Power-Off Menu will not work if
power-charging is ongoing.
Fallback Language
NO, SE, DK, EN, FI, DE, HU, ET,
PL, NL, ES, FR
Languages will be downloaded
from the host environment.
Backlight Auto/Always
Chip Direction
Chip up/Chip towards you/
Chip down
The direction in which the chip is
to be inserted into the terminal.
Customer Receipt Always/On demand
IFR Priority Domestic/None/International
Visibility: Only shown when
merchant has an agreement with
a national scheme.
Comment: The latest setting
value can be downloaded from
MS-TMS or update to MS-TMS.
Table 3: Parameter Menu Options
To Next Page
Loading...
Need help?
General
