Nets Move/3500 User Manual

Payment Terminals | Page 31 of 54
7.2 Access Point Name (APN) in GPRS Terminals
To choose the parameter location, go to Main Menu > Merchant Menu > Parameters > Change > Comms.
When the SIM card is Nets-owned, set the APN to Internet.
When the SIM card is self-owned, the setting is provided by the respective SIM card providers.
NB: For Nets-owned SIM cards, should the above settings not work, you may try changing the GPRS APN to
“Nets” and the Host IP address to 91.102.24.142.
For self-owned SIM cards, should these settings not work, you may try changing the Host IP Address to
91.102.24.142.
7.3 Static IP Addresses in Ethernet Terminals
To choose the parameter location, go to Main Menu > Merchant Menu > Parameters > Change > Comms.
Then scroll-down through the same Menu to set up all IP addresses.
Set DHCP Usage to Static. Then set the following:
› Terminal IP address:
› Gateway IP:
› Subnet Mask:
› DNS 1:
› DNS 2:
On exiting the Menu, the payment terminal will reboot to apply the changes.
7.4 ECR IP Address and Ports
In this type of set-up, the Nets payment terminal is connected to the ECR via an Ethernet cable.
› Go to Main Menu > Merchant Menu > Parameters > Change > Function / Comms / ECR (set to ”Yes”) > Comm
Type (set to ”IP Ethernet”).
› Now scroll to the ECR IP Address (set to the IP Address of the ECR e.g in the format of xxx.xxx.xxx.xxx).
› Exit the Menu. The payment terminal will now reboot.
NB: BAXI should also support the same set-up.

Nets Move/3500 Specifications

General

Brand	Nets
Model	Move/3500
Category	Payment Terminal
Language	English