Nets Move/3500 User Manual

Payment Terminals | Page 16 of 54
4. Card Reading
This section describes the various methods that may be used to read information on a customer’s bank card.
4.1 Chip
To read the card using the chip, the chip must be facing upwards when inserting the card into the front of the
terminal.
4.2 Magnetic Strip
To read the card using the magnetic strip, the strip must by facing left. Swipe the card as shown.
NB: If the contactless option is activated, press F2 (down arrow) to activate the magnetic strip reader.
4.3 Manual Key
This function can be used to purchase and return goods. Instead of the customer using their card, his/her card
data can be entered on the terminal.
1. Press MENU.
2. Press OK for purchase.
3. Enter the purchase amount, then press OK.
4. Press the F4 key (top-right of the terminal).
5. Enter customer’s card number (shown on card), then press OK.
6. Enter the card expiry date (mm/yy), then press OK.
7. Enter the card’s CVC number, then press OK. CVC is the three digits shown on the back of the card, next to
the customer’s signature.
8. The amount is verified by pressing OK.
9. If the amount is authorised, the terminal display will show APPROVED and a receipt is printed.
NB: This feature is only available for credit cards with signature check. Transactions that are not supported will
be rejected at the PSP side.
Chip
Magnetic Strip Contactless (NFC) Payments

Nets Move/3500 Specifications

General

Brand	Nets
Model	Move/3500
Category	Payment Terminal
Language	English