Nets NETS User Manual

58
3. Enter the Label Length number you wish to assign the scale to.
This number must be from 30 to 120. As you type the number, you
will see it in the Total Price Display.
4. Press
PRINT
ESC
SET
.
5. You are back in the Initial State.
To set Label Gap:
1. Enter ‘Main menu’, and follow 3 steps below.
2. Press
7
-
2
-
2
.
3. Enter the Label Length number you wish to assign the scale to.
This number must be from 0 to 40. As you type the number, you will
see it in the Total Price Display.
4. Press
PRINT
ESC
SET
.
5. You are back in the Initial State.
* Please refer picture 7-2
<Picture 7-2 >
Length
Gap
Length

Nets NETS Specifications

General

Brand	Nets
Model	NETS
Category	Scales
Language	English