MT 48 | 31
Output routing
Per default, the MT 48’s four mixes are routed to Speakers A, Speakers B, Headphones 1 and
Headphones 2. If needed, the mixes can be re-routed to dierent outputs. If, for instance you
have monitor speakers with an S/PDIF input (such as the Neumann KH 150) you could re-route
Mix 1 or Mix 2 to the optical output in S/PDIF mode (for the KH 150 you’d need an S/PDIF opti-
cal to coaxial converter).
X
Go to MENU → BUS ROUTING
X
Now scroll down to see the S/PDIF output and route Mix 1 (or whatever Mix you prefer) to
the S/PDIF output (stereo).
To Next Page
