MT 48 | 36
DAC filter
The DA converters oer four output filter modes:
X
Go to MENU → SETTINGS → AUDIO OUTPUTS → ROLL OFF FILTER:
Sharp (default setting): Oers a flat frequency response with an attenuation of 3 dB at 0.484 x
FS (23.2 kHz @48k), which has the tradeo of 35 samples latency.
Slow: Oers the lowest latency of 9 samples, with the tradeo of a gentle frequency response
attenuation reaching -3dB at 0.45 x FS (21.6 kHz @48k).
Apodizing: Fast roll-o, linear phase filter. Avoids pre-ringing for super accurate transient
response. Latency of 35 samples.
To Next Page
