9
MAIN TIME
• Is the time displayed on the scoreboard to keep track of event time
• Can count down or up
To change direction of main time refer to the OPTIONS section of this manual
To Start and Stop Main Time
1. Press to start main time
2. If time is 00:00.000 and is set to down time needs to be reset to start
3. If time is set to up time will start anywhere
There are two ways to stop main time
1. End time – If time reaches 00:00.000 when time is set to down. The auto horn (if enabled) will sound for four
seconds
2. Press to stop main time
To Set Main Time
1. Press then the control will then display
2. Enter the Minutes, Seconds, and Thousandth Second as needed. (Not all scoreboards will display 1/1000
th
second)
a. After all seven digits are filled it automatically accepts the time.
b. If less than 7 digits are entered and YES is pressed, then zeros will be placed in the unfilled digits and the
time will be accepted.
Note: Pressing NO at any point before the 7
th
digit is pressed in the time entry process will reset time to previous values
Time: ►MM:SS.sss
Example
1. Time is set to 10:00.000
2. SET > TIME is pressed and an entry of 1, 2, 3, 4 is entered.
3. NO/CANCEL is pressed.
4. Time will then be restored to 10:00.000
Example
1. An entry of 1, 2, 3, 4, 5, 6, 7 will set the time to 12 minutes 34 seconds and 567 1000’s of a second
To Next Page
Loading...
Need help?
General
