Nevco MPCW-7 Control User Manual

3
Wireless
• The MPCW-7 can operate one or more selectable wireless receivers depending on the customer’s need.
• The receivers can be linked or unlinked depending on the operational requirements at game time.
It is strongly recommended to save wireless settings in each profile used.
Different wireless settings should be saved to individual profiles.
Note: An ID number of every receiver desired to be linked must be programmed into the MPCW-7.
To do this, refer to the OPTIONS section of this manual.
Wireless functionality is further explained in the OPTIONS portion of this manual
To Link or Unlink receivers:
1. Press until the MPCW-7 displays
2. Press MPCW-7 will display
3. Press MPCW-7 should display the first receiver in the list.
Press YES again to link or unlink that receiver. The “*” displayed on the control
next to the receiver name means the receiver is linked
4. To link another receiver:
Press to cycle through the list of available receivers
Press YES to link the displayed receiver.
Wireless >>
Link Receiver
Rcvr Name 1
*
Rcvr Name 2

Nevco MPCW-7 Control Specifications

General

Brand	Nevco
Model	MPCW-7 Control
Category	Control Unit
Language	English