Nevco MPCW-7 Control - Horn Key Tone; This Setting will Change Tone of the Horn that Sounds When the Horn Key Is Pressed. to Change the Tone; Aux Horn Tone; Time out Timer Tone

29
Horn Key Tone
This setting will change tone of the horn that sounds when the horn key is pressed. To change the tone:
1. Press until the display shows
2. Press the MPCW-7 will display
3. Press the desired horn tone key from 0 to 9; or to disable the horn key
Aux Horn Tone
This setting will change both the Aux stop time and end time horn tone.
1. Press until the display shows
2. Press the MPCW-7 will display
3. Press the desired horn tone key from 0 to 9
Time out Timer Tone
This setting will change both the end time out tone and warning time tone.
1. Press until the display shows
2. Press the MPCW-7 will display
3. Press the desired horn tone key from 0 (no horn tone) to 9
Segment Timer Horn Tone
This setting changes the segment timer auto horn tone.
1. Press until the display shows
2. Press the MPCW-7 will display
3. Press the desired horn tone key from 0 (no horn tone) to 9
WIRELESS
The Wireless options are to link receivers, add receivers, and delete receivers from the control. To set the
wireless options:
Press OPTIONS until the MPCW-7 display reads
Press YES to enter the Wireless Options menu
Aux Tone: #
Aux Tone: #◄
TimeOut Tone: #
◄
TimeOut Tone: #
Segment Tone: #◄
Segment Tone: #
Wireless >>
Link Receiver
Key Tone: #
Key Tone: #◄