Nevco MPCW-7 Control User Manual

21
Changing Direction of Aux Time
Within Aux Time menu:
1. Press until the MPCW-7 display reads
2. Press to change the direction of time
a. For time counting up display will read
b. For time counting down display will read
Setting Time Switch Operation
Within Aux Time menu:
1. Press until the MPCW-7 display reads
2. Press to enable or disable time switch operation of Aux Time
a. The * represents enabled
Setting Aux Stop Time
Within Aux Time menu:
1. Press until the MPCW-7 display reads Stop Time.
a. If Aux Stop Time has never been set before display will read
2. Press to begin editing Aux Stop time
3. Enter the Minutes and Seconds.
a. After all four digits are filled it automatically accepts the stop time.
b. If less than 4 digits are entered and YES is pressed then zeros will be placed in
the unfilled digits and the time will be accepted.
c. If NO/CANCEL is pressed before all 4 digits are entered it restores the
previous value and completes the editing process
Changing Aux Time Style
Within Aux Time menu:
1. Press until the MPCW-7 display reads
2. Press
3. Press to scroll through the styles
4. Press to enable the time style you want to use
a. An asterisk indicates which style is enabled
Direction: ▲
Direction: ▲
Direction:
▼
Time Switch:
Time Switch: *
Stop Time:00:00
Stop Time:
MM:SS
◄
Style >
>
MM:SS
HH:MM

Nevco MPCW-7 Control Specifications

General

Brand	Nevco
Model	MPCW-7 Control
Category	Control Unit
Language	English