Nevco MPCW-7 Control User Manual

14
EVENT
Press EVENT to display the current event number
The control will display
Setting Event
1. Press
2. The control will display
3. 1
st
digit: Enter any value 0-9
a. If that single digit value is the desired setting, then press YES, if not continue to step 4
4. 2
nd
digit: Enter any value 0-9
FT/M (Feet/Meters)
Press FT/M to display the current Feet/Meters
The control will display
Setting FT/M
1. Press
2. The control will display
3. 1
st
digit: Enter any value 0-9
a. If that single digit value is the desired setting, then press YES, if not continue to step 4
4. 2
nd
digit: Enter any value 0-9
5. 3
rd
digit: Enter any value 0-9
Ft/M: # ◄
Ft/M: #
◄
Event: # ◄
Event: # ◄

Nevco MPCW-7 Control Specifications

General

Brand	Nevco
Model	MPCW-7 Control
Category	Control Unit
Language	English