INSTRUMENTATION & CONTROLS
Copyright © 1998 New Flyer Industries Ltd. 59
Climate Control Switch
The Climate Control toggle switch is a three position toggle switch
that controls the heating system. In the AUTO position, the sys-
tem will maintain a preset temperature. In the VENT position, the
roof vent fans draw fresh air into the vehicle. The OFF position
deactivates the system.
Vent Mode Fan Switch
The Vent Mode Fan toggle switch controls the fans of the roof
vents. With the Climate Control knob positioned to VENT, position
the switch to HIGH or LOW for a desired fan speed.
Driver’s Light Knob
The Driver’s Light knob controls the light above the driver’s area.
Turning the knob from the extreme right [OFF] to high [H] illumi-
nates the light. Setting the knob to a position between high [H]
and low [L] adjusts the light’s brightness.
Stop Request Switch
The Stop Request toggle switch controls the stop request indica-
tors of the passenger signal system. Re-positioning the toggle
switch from ON to OFF, deactivates the stop request sign, the
instrument panel indicator and the chime.
Speaker Select Switch
The Speaker Select toggle switch controls the interior and exterior
speakers of the public address [P.A.] system. Position this toggle
switch to INTERIOR or EXTERIOR to direct the P.A. announce-
ment to the desired audience.
Sander Switch
The Sander toggle switch is a guarded momentary toggle switch
for control of the wheel sanding system. Moving the guard back
and pushing the switch up will release sand in front of the rear
wheels. Releasing the switch will stop the flow of sand. Lower the
switch guard when not in use.
To Next Page
