Newtec EL470 - Page 129

Modem Reference Manual for EL470 IP Satellite Modem
Structured Command
IfBbTxEthqStats
BB TX Eth queue
status
BB TX Eth queue stat
Location /Modem/Monitor/Interfaces/Ethernet
Only valid for DVB-S2 modes.
Description
Readout of the baseband TX Ethernet queue status. This queue contains
the frames that travel from the Ethernet interface to the baseband
interface.
RMCP
Command
bte Access Normal user : R
Expert user : R
SNMP Table ntcDevsMod01InterfaceEntry
Command ntcDevsMod01IfBbTxEthqStats
OID 1.3.6.1.4.1.5835.3.1.4.1.206.1.1
Variables
IfBbTxEthqCurFilling
IfBbTxEthqMaxFilling
Page
199
200
Command
IfBBCntRst
Baseband counters
reset
Baseband counters re
Location /Modem/Monitor/Interfaces/Ethernet
Only valid for DVB-S2 modes.
Description
This command resets the following baseband counters : IfBBTxCounter,
IfBBRxCounter and IfBBRxDropCounter.
RMCP
Command
BCr Access Normal user : RW
Expert user : RW
SNMP Table ntcDevsMod01InterfaceEntry
Command ntcDevsMod01IfBBCntRst
OID 1.3.6.1.4.1.5835.3.1.4.1.55.1.1
Values Factory Default
never
Enumeration Value
Each second
Never
Once
0
1
2
version 3.1
122
SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS