Newtec EL470 - Page 160

Modem Reference Manual for EL470 IP Satellite Modem
Command
MoCntRst
Packet counters reset Packet counters rst
Location /Modem/Monitor/Modulation/Packets
Description
Command to reset the packet counters. Click on "all" to reset the statistics
counter described in the tables.
RMCP
Command
mcr Access Normal user : no access
Expert user : W
SNMP Table ntcDevsMod01ModulatorEntry
Command ntcDevsMod01MoCntRst
OID 1.3.6.1.4.1.5835.3.1.3.1.62.1.1
Values Factory Default Enumeration Value
All 0
/Modem/Monitor/Modulation/Frames
Only valid for DVB-S2 modes.
Command
MoDummyPLRate
Dummy Physical Layer
frame-rate
Dummy PL rate
Location /Modem/Monitor/Modulation/Frames
Description
Readout of the dummy physical layer frames per second.
RMCP
Command
dfr Access Normal user : R
Expert user : R
SNMP Table ntcDevsMod01ModulatorEntry
Command ntcDevsMod01MoDummyPLRate
OID 1.3.6.1.4.1.5835.3.1.3.1.68.1.1
Values GUI Unit
fps
Cmd Unit Factory Default (CU)
fps 0
Expert Range (CU)
-1e+38 .. 1e+38
Command
MoDummyPLCnt
Dummy Physical Layer
frame-count
Dummy PL count
Location /Modem/Monitor/Modulation/Frames
Description
Readout of the total number of inserted dummy physical layer frames
since the last reset of the counters.
RMCP
Command
dfc Access Normal user : R
Expert user : R
SNMP Table ntcDevsMod01ModulatorEntry
Command ntcDevsMod01MoDummyPLCnt
OID 1.3.6.1.4.1.5835.3.1.3.1.67.1.1
version 3.1
153
SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS