Modem
Reference Manual for EL470 IP Satellite Modem
Command
MoFecMod2
FEC-rate and
modulation
FEC-rate and mod.
8PSK-3/5
8PSK-2/3
8PSK-3/4
8PSK-5/6
8PSK-8/9
8PSK-9/10
81
82
83
85
88
89
Command
MoPilots
Physical Layer Pilot
insertion
Pilot insertion
Location /Modem/Control/Modulation/Main
Used as
variable of
Command(s)
IfStrConfig
Page
79
Only valid for DVB-S2 modes and XPE modes.
Description
Configuration command to enable or disable the insertion of DVB-S2
physical layer pilots.
When enabled, every 16 slots (of 90 symbols) the modulator will insert
36 non-modulated symbols to aid in receiver synchronisation. This
parameter is the same parameter as the one that can be entered in the
DVB-S2 stream table.
Remark: This is a CCM command.
RMCP
Command
ACP Access Normal user : RW
Expert user : RW
SNMP Table ntcDevsMod01ModulatorEntry
Command ntcDevsMod01MoPilots
OID 1.3.6.1.4.1.5835.3.1.3.1.81.1.1
Values Factory Default
off
Enumeration Value
Off
On
0
1
version 3.1
73
SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS
To Next Page
Loading...
