Newtec MDM3100 - 4.5.2 Overview

R3.1_v1.2
13/76
Modem Web Interface
User Manual MDM3X00
4.5.2 Overview
4.5.2.1 Ethernet Overview
The Ethernet status is indicated by a state description.
The possible modem state descriptions are given below:
Ethernet status
Description
Ok
A DHCP address is given (if DHCP is enabled) and the connection is OK.
Warning
Only appears if DHCP is enabled.
Connection is OK, but no DHCP address is given.
Error
Connection is not OK.
4.5.2.2 Satellite Overview
The modem state is indicated by a state description.
The possible modem state descriptions are given below:
Modem state
Description
Awaiting
installer action
The terminal is waiting for an action of the installer.
Satellite
network
lookup
The terminal is looking for the satellite network.
Synchronizing
The terminal found the satellite network and time synchronization.
Synchronized
The terminal is synchronized and can directly log in on the satellite network
when IP traffic is received via the Ethernet interface.
Network login The terminal is trying to log in on the satellite network.
Operational
The terminal is logged in.
The return link technology (CPM, HRC or DVB-S2) used by the modem is also
shown.
An error message can be displayed. This error message displays the current error status and will be
reset when the terminal has entered the satellite network and the terminal is operational.
Please refer to the Troubleshooting Guide on the CD-ROM (provided with your modem)
for more details on possible errors and actions needed to resolve the occurring error.