Nexcom NDiS M535 - Page 47

Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved.
33
NDiS M535 User Manual
Chapter 4: BIOS Setup
Module Management
This section is used to configure onboard module settings.
Exit
Advanced Chipset PCIPnP Security
Main
Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enables or disables boot for
Mini Card.
Onboard Module Setting
Mini Card [Enabled]
Restore on AC Power Loss [S3 (Suspend to RAM)]
USB Wake Up [Enabled]
Mini Card
Enables or disables boot for mini card.
Restore on AC Power Loss
Select AC power state when power is re-applied after a power failure.
USB Wake Up
Enables or disables wake up from USB devices.
AMT Configuration
This section is used to configure Active Management Technology (AMT) options.
Advanced Boot Security Save & ExitMain
Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable/Disable Intel (R) Active
Management Technology BIOS
Extension.
Note : iAMT H/W is always
enabled.
This option just controls the
BIOS extension execution.
If enabled, this requires
additional rmware in the SPI
device
Intel AMT
Un-Congure ME
[Enabled]
[Disabled]
Intel
®
AMT
Enables or disables Intel
®
Active Management Technology.
Un-Configure ME
Enables or disables un-configure ME without password. Enabled will clear
all ME settings.