Next Matrix Live - Function Keys in EDIT PROGRAM Mode

5.2 FUNCTION KEYS IN EDIT PROGRAM MODE
GB
In EDIT PROGRAM mode there are 6
ffuunnccttiioonn kkeeyyss
see (Fig. 15 par
55..11
)
GRAB key :
Press this key to transfer a chase in one register, press one of the 1÷12 keys to confirm
LIVE key :
Pressing this key the display change to start chase
GO key :
Press this key to start the program.
Note: Keep Master Dimmer Faders to the maximum (see par 6.11)
The key becomes PAUSE the display changes as shown in (Fig. 15 par
55..33
)
PAUSE key :
Press this key to stop the program in the current position, pressing the
GGOO
key it reco-
vers from the same position.
SELECT key :
Pressing this key it is possible the multiple selection of the programs . The display chan-
ges as shown in
(Fig. 14) see par
55..33
Press one of the 1÷12 keys to select the program.
For successive programs use the
PPAAGGEE
key.
REPEAT key :
Press this key to modify the number of repetitions of the program, the value is in num-
ber from 1 to 99 use the faders under the REPEAT writing, or the encoder. To confirm
the modify press the
OOKK
key, to get out of the function press the
EESSCC
key.
LENGTH key :
Press this key to set how many scenes of the program will execute, the value is in num-
ber from 1 to 48 use the faders under the
LENGTH writing, or the encoder. To confirm
the modify press the
OOKK
key, to get out of the function press the
EESSCC
key.
MUSIC key :
Pressing this key, and activating
MMUUSSIICC OONN
, the active program will change the scenes
to time of music, in the box of the program and to the side at symbol play the display
shows a note.
The internal music sensor has an automatic gain adjustment which allows to have a
signal level good for
Matrix working.
The input music signal is a 0dB mono/stereo so it could be taken from sound sources
like Mixer, CD, Dat etc.
UNITS keys :
Press this key to set what unit will be active in the program.
For successive units use the
PPAAGGEE
key.