Next Matrix Live - Function Keys in PROGRAM Mode

5.4 FUNCTION KEYS IN PROGRAM MODE
GB
In PROGRAM mode there are 6
ffuunnccttiioonn kkeeyyss
see (Fig. 17 par
55..33
).
PAUSE key :
Press this key to stop the program in the current position, pressing the
GGOO
key
it recovers from the same position.
STOP key :
Press this key to stop the program with return to the function edit program
see (par
55..11
), pressing the
GGOO
key it start from
the first scene.
ALL key :
Press this key to select all the program from 1 to 48.
SOLO key :
Press this key to select only the program shown in the box
PPRROOGG
, if we have
selected with the
AALLLL
key all the
4488
program, and we wants to selectd only the
program (es. n°
0022
)
,,
press twice the key
0022
of program selection. The prog
box will indicate
PPRROOGG 0022
now the
SOLO key unselect all the other program,
activating
SOLO the
PPRROOGG 0022
SPEED key :
Pressing one of these two keys will be increased/decreases the speed of execution
of the program the value is in percent and varied from 10% at 500%.
To the value 100%. the speed of execution is that planned in the scenes.