1.1 DESCRIZIONE PANNELLO COMANDI
GB
1.1 DESCRIPTION OF THE FRONT PANEL
• 1 bank of 12 faders: controls the live playback registers.
• 12 keys: perform direct registers functions.
• 12 bicolor led bicolor: visualize registers status.
• TIME fader: to control stepping in real time .
• GRAB key: grab the active scene into a register.
• BANK key: to select registers page.
• Led display: visualize registers active page.
• Lcd: visualizes registers job mode..
• FUNCTION key: to set lcd functions.
• Encoder: to set lcd values.
• 2 banks of 12 faders : to control two presets A+B.
• 12 keys: perform flash on the channels.
• 12 led: Visualize the channels status.
• A+B faders: to control presets A+B level output.
• Master Chase fader: to control Chase level output.
• A+B keys: to enable presets A and B (A+B mode) or to switch
the flash buttons of the presets from one bank to the other (single
preset mode)
• BANK key: to select the preset page max 12.
• Led display: Visualize the active preset page.
Manual presets:
Live registers: