Nextiva V3320RD - Page 37

5. For each stream, set the following:
a. For Transfer type, select one of the following:
Multicast
Unicast
b. In the RTPPort box, type the RTPport to use.
c. In the URLbox, type a name to use to access the stream.
d. In the Multicast Address box, type the IP address of the multicast
server.
Note
The URL to view video is: rtsp://<unit_ip_address>/<RTSPport>/<URL>.
6. Click Save to enable the settings or click Restore to use the default
settings.
Configuring the RTSPSettings
37 © 2013 Verint Video Systems Inc.