7. Click Save to enable the settings or click Restore to use the default
settings.
Configuring Video Profiles
There are up to six profiles to choose from. The one that users are using will be
in Current Profile.
In each profile, parameters are all configurable including Image Mode,
Resolution, Frame Rate, Bit Rate, Bit Rate Control, and GOP. Be sure to click
Save when done.
Single Stream Double Stream Triple Stream
Profile 1 1920x1080 / H.264 640x480 / MJPEG
Profile 2 1920x1080 / MJPEG
Profile 3 1920x1080 / H.264 640x480 / H.264
Profile 4 1920x1080 / H.264 320x240 / H.264 320x240 / MJPEG
Profile 5 1280x720 / MJPEG 320x240 / H.264 320x240 / MJPEG
Profile 6 1280x720 / H.264 1280x720 / MJPEG
Stream 1, Stream 2, and Stream 3 are available for selection for simultaneous
triple streams with optimized quality and bandwidth. However, no more than
two 720P video can be streamed concurrently. That is to say,
720P video is available for double stream at most with effective either codecs
of MJPEG or H.264. The video signal sent to the Web-Client from the unit has a
number of settings that can be edited. The Profiles enable users to configure
settings such as Resolution, Frame Rate, and Picture Quality. Since, the unit
supports dual streams (for live and recording), they should be configured
respectively.
Configuring Video Profiles
27 © 2013 Verint Video Systems Inc.
To Next Page
Loading...
