Nextiva V3320RD - Configuring the Network Settings

Configuring the Network Settings
By default, all V3320RDdevices are shipped with the following network settings
Network
IPAddress 192.168.0.30
Subnet Mask 255.255.255.0
You can configure the IPproperties of the IPcamera to match that of your
network, either by entering a static IPaddress or using a Dynamic Host
Communication Protocol (DHCP) address.
To use a DHCPaddress, you need to have a Dynamic Host Communication
Protocol (DHCP) server where the DVR can automatically obtain a valid IP
configuration.
► To configure network setttings
1. In a web browser, type the IP address of the Nextiva IP camera in the
Address bar, and then press ENTER.
2. Type the username and password.
3. Click Configuration >Network Settings>Basic.
4. In the Camera Name box, type a name for the unit or simply use the
Chapter 3: Configuration
© 2013 Verint Video Systems Inc. 34