Nextiva V3320RD - Page 40

4. Set the Date and Time.
To Perform the following steps
manually set
the date and
time
a. Select Manual.
b. From the Date &Time manual setting
section, do the following:
a. In the Date box, type the current date
and year.
b. In the Time box, type the current time.
use an
NTPserver
a. Select NTP.
b. From the NTPServer section, do the
following:
a. In the Time Zone list, select the time
zone where the IP camera is located.
b. In the NTPServer box, type the address
of an NTP server to synchronize date and
time.
c. In the Time Adjustment Period list,
select the interval to calibrate the time.
d. Click Save &Test to test the
NTPsettings.
synchronize
with the PC
Select Synchronization from PC.
5. For Daylight Savings, select ON.
6. Click Save to enable the settings or click Restore to use the default
settings.
Chapter 3: Configuration
© 2013 Verint Video Systems Inc. 40