Nibe F1245 - Page 84

1)
Max. permitted impedance in the mains connected point in accord-
ance with EN 61000-3-11. Start currents can cause short voltage
dips that could affect other equipment in unfavourable conditions.
If the impedance in the mains connection point is higher than that
stated it is possible that interference will occur. If the impedance in
the mains connection point is higher than that stated check with
the power supplier before purchasing the equipment.
2)
With feet dismantled the height is approx. 1930 mm.
Working range heat pump, compressor oper-
ation
The compressor provides a flow temperature up to 65
°C, the remainder (up to 70 °C) is obtained using the
additional heat.
12 kW 3x400V, 8-12 kW 1x230V
0
10
20
30
40
50
60
70
-15 -10 -5 0 5 10 15 20 25 30 35
°C
p
°
C
7HPSHUDWXUH
,QFRPLQJ EULQH WHP
S
)ORZ SLSH
5HWXUQ SLSH
Other
0
10
20
30
40
50
60
70
-15 -10 -5 0 5 10 15 20 25 30 35
°C
p
°C
7HPSHUDWXUH
,QFRPLQJ EULQH WHP
S
)ORZ SLSH
5HWXUQ SLSH
NIBE™ F1245Chapter 12 | Technical data82